Assembling all programs nanoCAD. Update on 07/04/2010



Assembling all programs nanoCAD. Update on 07/04/2010
Size: 1.36 Gb

The members were:
* NanoCAD ASAP 2.0;
* NanoCAD 2.0 (pre-release);
* NanoCAD Topoplan 1.0 (build 136);
* NanoCAD Electro 2.0 (build 329);
* NanoCAD OPS 2.0 (build 191);
* NanoCAD SCS 2.0 (build 430);
* NanoCAD Mechanics 2.0 (1195);
A new version of 07.04.2010: nanoCAD VC 1.0 (build 250).
Year: 2010
Version: 2.0 (build 1283), 2.0 (pre-release, build 1045), 1.0 (build 136); Electro 2.0 (build 329), OPS 2.0 (build 191), SCS 2.0 (build 430); Mechanics 2.0 (build 1195); VC 1.0 (build 250).
Developer: Company Nanosoft
Platform: Windows
Language: Russian only
Tabletka: No
Size: 1.36 Gb
nanoCAD ASAP 2.0:
Program nanoCAD ASAP is designed for registration of design documentation in accordance with the standards ASAP. Provides high speed and automation of transactions processing through the application of technologies of intelligent drawing. Contains functional nanoCAD to work on the creation of two-dimensional drawings. Output documents stored in the format DWG.
All design elements and settings of the program strictly comply with the standards ASAP, as confirmed by the certificate of conformity POCC RU.SP15.N00260 from 09.09.2009, the (full list of supported GOST see below).
Extras. Information:
The new version is built on an updated engine platform nanoCAD, which gives:
- Full support for the DWG format thanks to the new technology works;
- Full-fledged work to create two-dimensional drawings;
- High-speed processing of massive drawings;
- To use as part of integrated automation;
- Possibility to use the program for viewing DWG files.
Demo version - free permanent license program is designed to explore the functionality without the right to commercial use. The program can be freely downloaded and installed an unlimited number of times. No restrictions on validity, does not require registration, serial number and digital certificate. Contains limits in the form of messages of various kinds, and special markings on the sheet when printing.
Installing the demo version:
- Download the distribution (from the official site of the program, either with rutracker.org; either (1254). exe);
- Start the installation wizard and follow its instructions;
- Run the program;
- When you run the program select “Run in demo mode”.
Demo version restrictions:
- Informational message when you start the program;
- Informational message when you save the file;
- The label “Not for commercial use” in the title of the program;
- Text “DEMO MODE” in the About dialog.
- Chaotic inscription “Demo” in the derivation of a document to print.
The demo version did not limit the discovery, preservation DWG format and not to cut the program functionality!
Evaluation - free fully functional temporary license program is designed to explore the features without the right to commercial use. The program can be downloaded and installed only once during the version. It is time-limited - 30 days, requires pre-registration on the site, receiving the serial number and the electronic certificate (license file).
Installing the trial version:
- Download the distribution (from the official website of the program;
- Start the installation wizard and follow its instructions;
- Please register nanoCAD :: áåñïëàòíàÿ ñèñòåìà àâòîìàòèçèðîâàííîãî ïðîåêòèðîâàíèÿ (ÑÀÏÐ), ñîâìåñòèìàÿ ñ ôîðìàòîì DWG .
- Log into “My Account -> Manage Licenses.”
- Select a position nanoCAD ASAP link “Details”.
- In the section “Get a license, click” Get a license - you will have a new position in the table of licenses.
- Click on the “Evaluation License - Download the license file.
- Save the license file (*. lic) to your hard drive.
- Open the “Registration Wizard”. Registration Wizard is in the root directory of the software and can be run through the main panel Windows> Start> All Programs> Nanosoft> nanoCAD ASAP 2.0> Registration Wizard.
Select the item “Activate license” and specify the path to the saved license file (*. lic).
The evaluation version nanoCAD ASAP 2.0 closely follows the commercial version, but is limited in time (30-Number of days) and does not entitle commercial use.
Commercial - paid full-featured license with the right of commercial use for a period of 1 year. Purchase a license requires pre-registration site to obtain the serial number and e-certificate. It is possible to print a license certificate that confirms the legality of the program.
Install the commercial version:
- Download the distribution (from the official site of the program, either with rutracker.org; either (1254). exe);
- Start the installation wizard and follow its instructions;
- Please register nanoCAD :: áåñïëàòíàÿ ñèñòåìà àâòîìàòèçèðîâàííîãî ïðîåêòèðîâàíèÿ (ÑÀÏÐ), ñîâìåñòèìàÿ ñ ôîðìàòîì DWG .
- Log into “My Account -> Manage Licenses.”
- Select a position nanoCAD ASAP link “Details”.
- On the “License Management”, click “Get a license - you will have a new position in the table of licenses.
- Click “Buy”. Then you find yourself on the page refill. After receipt of payment you will receive notification. - Depending on the type of payment is required at different times.
- Upon receipt of the notification, click the “Commercial License - Download the license file.
- Save the license file (*. lic) to your hard drive.
Open the “Registration Wizard”. Registration Wizard is in the root directory of the software and can be run through the main panel Windows> Start> All Programs> Nanosoft> nanoCAD ASAP 2.0> Registration Wizard.
- Select the item “Activate license” and specify the path to the saved license file (*. lic).
At the end of the term of the subscription program automatically switches to demo mode. The functions of conservation, open and edit (!) Files the users are.
Supported GUESTS:
- GOST 21.101-97 “ASAP. The basic requirements for working papers ”
- GOST 21.501-93 “ASAP. Terms perform architectural and engineering design drawings ”
- GOST 2.301-68 “ESKD. Formats ”
- GOST 2.302-68 “ESKD. Zoom
- GOST 2.303-68 “ESKD. Lines ”
- GOST 2.304-81 “ESKD. Fonts drawing ”
- GOST 2.305-2008 “ESKD. Images - types, sections, section ”
- GOST 2.306-68 “ESKD. Legend graphic materials and rules for their application in the drawings ”
- GOST 2.307-68 “ESKD. Dimensioning and tolerances ”
- GOST 2.316-2008 “ESKD. Regulations on the inscriptions on the drawings, specifications and tables ”
- GOST 2.312-72 “ESKD. Conventional images and symbols seams welded joints ”
- GOST 2.313-82 “ESKD. Conventional images and symbols detachable connections ”
- GOST 5264-80 “Manual arc welding. Joints. Main types, design elements and dimensions ”
- GOST 2.104-2006 “ESKD. Basic records ”
- GOST 2.106-96 “ESKD. Text Documents
Screenshots:

http://excluzive.net/uploads/posts/2...o9y2kjmav.jpeg

nanoCAD 2.0 (pre-release):
JSC “Nanosoft” invites everyone to take part in the final testing of the first domestic freely available CAD platform. This produced distribution program allows you to install a commercial version of the platform nanoCAD 2.0!
Download, use and send us your feedback. Let us develop the Russian CAD together!
Output the final free version nanoCAD 2.0 in the spring of 2010.
nanoCAD 2.0 - the first home is a freely available base CAD platform for various industries. Platform nanoCAD contains all the essential tools of basic design, but thanks to an intuitive user interface, direct support of the DWG format and compatibility with other CAD solutions is the best choice in the transition to alternative basic solutions.
Extras. Information:
nanoCAD 2.0 contains all the necessary tools of basic design and allows you to:
- Create and edit a variety of 2D and 3D vector primitives, text, objects of design drawings, set display and print graphics and technical documentation;
- Create and use all kinds of tables, to perform a specifying elements of a drawing by an attributive data blocks and objects of decoration ;
- To make settings working environment for the registration of working documents on different standards;
- Conduct full-scale operation in 3D-space model and 2D-space sheet through viewports;
- View, create and edit 3D-surface model to create a custom coordinate system for editing and geometric reference to the 3D-objects;
- Through the use of a single file format DWG to full cooperation and interaction with fellow designers who design drawings in the other most common CAD;
- To use when designing any previously completed technical documentation stored in electronic format raster (scanned drawings, texts, tables, pictures);
- Ready to print technical documents on any print device, installed in the operating system.
Commercial version - description and installation steps:
Commercial - free fully functional license with the right of commercial use without time limits. The program works on the principle of “download-play”. But at the same time, users may voluntarily register the product. In this case nanoCAD 2.0 is registered in the name of the user, a dialogue about the program will display your login information and you will automatically subscribe to the newsletter for the program. Registration consists of two steps.
Step 1:. Register online
Before registering the software on your name or your organization must register on the site nanoCAD :: áåñïëàòíàÿ ñèñòåìà àâòîìàòèçèðîâàííîãî ïðîåêòèðîâàíèÿ (ÑÀÏÐ), ñîâìåñòèìàÿ ñ ôîðìàòîì DWG .
Step 2. Register software
After registering on the site and install the software on your computer, open the Registration Wizard: Start -> All Programs -> Nanosoft -> nanoCAD 2.0.
Screenshots:


http://excluzive.net/uploads/posts/2...89suwyxx5.jpeg

nanoCAD Topoplan 1.0 (build 136):
nanoCAD Topoplan - solution for creating and maintaining topographic plans scale from 1:500 to 1:5000 in the standard symbols of different localization: point, line and area. The product includes a library of topographic map symbols, satisfying the requirements of the Federal Service of state registration, cadastre and cartography.
The program ensures the unity of the models and maps, which allows, on the one hand, to obtain real cause of the normalized symbols and significantly reduce time-consuming manual post-editing for conditioning plans, and on the other - to create a model that satisfies all the metric and topological relationships. Final mapped digital models can be used by designers, and systems of the duty of the plan. The objects can be attributed to semantic information and then use them in the inventory or any other information and mapping systems. The presence of contours provides information on the linear or the network topology and use it in a GIS.
The main advantages nanoCAD Topoplan:
- Having your own graphics core.
- User-friendly, intuitive interface.
- Wide range of settings, allowing to organize the work in strict accordance with the internal standards of the enterprise.
- Ability to connect different data sources to create topoosnov: archival kartmaterialy on solid medium, the data field of topographic-geodetic observations, topological data of different GIS systems.
- Built-normative reference framework for the rules of rendering of topographical signs, including topographic fonts.
- Mode “assistant”, which provides the user with clues as to render the selected characters.
- Manageability created models cards according to the method of simplified generalization.
- Ability to send finished drawings to other graphics systems.
- Making ready topoplana given size in paper space systems.
Screenshots:

http://excluzive.net/uploads/posts/2...pcrdmzgsq.jpeg

nanoCAD Electro 2.0 (build 329):
The software is designed to nanoCAD Electro-aided design in terms of power equipment (EM) and internal lighting (EO) of industrial and civil objects.
The functional program allows the design engineer to focus on addressing the conceptual issues, freed from labor-intensive routine work: marking equipment, carry out the necessary calculations, counting all the equipment, materials and details of the specification, drawing a cable magazine, forming a network schematic. In this case the risk of the project documentation errors caused by the action of the so-called “human factor”, is minimized. Thus nanoCAD Electro allows to significantly reduce design time and thus improve the quality of project documentation.
Having your own graphics core makes nanoCAD Electro independent of other graphic systems, and support for DWG format facilitates the exchange of information with subcontractors and customers.
Summary of the main advantages nanoCAD Electro:
- Having your own graphics core.
- User-friendly, intuitive interface.
- Integrated Project Manager.
- Wide range of settings, allowing to organize the work in strict accordance with the internal standards of the enterprise and the particularities of a project.
- Automatic labeling equipment and cables on a custom mask.
- Possibility of a hand-filling technology jobs, and its imports from the exchange XML-file.
- The possibility of constructing an electric network in several plans, with preserving the links between them.
- Simulation of how power and control power supply.
- Availability of the Master checks the correctness of the supervisory network construction, selection of equipment and cables.
- Availability of a separate unlicensed applications - database manager, intended for database management, editing and updating, as well as to perform import / export between the two.
Build 329 bug fixes:
- Fixed output templates of documents;
- Corrected template special callouts;
- Fixed error when executing command “Blow up the plan”;
- Fixed bug with splitter box misses to the specification;
- Fixed incorrect connection objects plume.
- Update is installed as a new software product after removing the old assembly.
What is new compared to version 1.1:
- Increased speed of the program.
- The program can obtain new documents: “The results of the lighting calculation,” “The results of electrical calculations” and “Explication of the premises.
- In the project manager an opportunity to specify details of the documents, followed by automatic output of this information in the output documents.
- There is a full module settings spreadsheet documents.
- Now you can customize your automatic callouts.
- Reworked Razel “Setting labeling.
- Added ability to change the project type panel from the database.
- Added the ability to attach to the elements of the database file with the image of the product. When the mouse on the image icon in the lower right corner of the picture increases.
- Fixed a bug where “flew” database settings “Name” and “Description” when it disconnected / connected to the database manager.
- New types of feeders: RCD, knife + starter, knife + Automatic, Knife switch Knife switch + machine +
- In the “Installation of cables / wires” can automatically route the cables for all retreating lines simultaneously.
- In the “Electrical model of” an opportunity to ask each section of cable is a type of database.
- Now when you copy a plan from one drawing to another all the connections between the elements are preserved.
- Added command “blow up the plan. After executing this command in the project folder appears file *. dwg, in which all the smart objects nanoCAD Electro divided into primitives.
- A window “facilities manager”, which is convenient to produce a centralized operation with the premises.
- If you generate a single-line circuit network sectional feeder now displays a separate block, similar to induction and feeder.
- Removed the condition of the obligatory presence of the device input connections from the panels.
- Fixed a number of observations and errors.
Screenshots:

http://excluzive.net/uploads/posts/2...n7ufju6yx.jpeg

nanoCAD OPS 2.0 (build 191):
Specialized software nanoCAD OPS - second tool for designers “slabotochki”, which is designed taking into account the basic standards JV 5.13130.2009, RD 25.953-90, RD 78.36.002-99, RM 78.36.001-99, GOST 21.101-97. Having your own graphics core makes nanoCAD OPS independent of other graphics systems, and support for DWG format facilitates the exchange of information with subcontractors and customers.
The software nanoCAD OPS allows the following tasks:
- Consolidation of information on the project;
- Establishing a system of cable channels;
- Automatic alignment of fire (point and linear) detectors on the premises in accordance with the requirements of the joint venture 5.13130.2009;
- Automated placement of security alarms ;
- Automated placement equipment ACS;
- Creation and routing loops signaling (conventional and analogue);
- Creation and trace interface loops;
- Automatic preparation of accounting documents (specification, cable magazines).
Screenshots:
http://excluzive.net/uploads/posts/2...khwaoytil.jpeg

nanoCAD SCS 2.0 (build 430):
Specialized software nanoCAD SCS - a tool to improve the efficiency of labor in the design of structured cabling systems, the designers of slang - “slabotochki. Having your own graphics core makes nanoCAD ACS independent of other graphic systems support for DWG format facilitates the exchange of information with subcontractors and customers.
In nanoCAD SCS combines a comfortable, specially designed interface, like chosen and customized tools for graphing, as well as the means to perform the necessary calculations when selecting equipment.
The software nanoCAD ACS allows us to solve the following tasks:
- Consolidation of information on the project;
- Establishing a system of cable channels;
- Projecting horizontal subsystem;
- Design of main subsystems of the building;
- Design of distribution points and floor of the building;
- Design of main cables and cross-telephony building;
- Automatic routing of cables;
- Automatic preparation of accounting documents (specification, cable magazines, schemes of assembly constructs, the block diagram).
Briefly about the basic features nanoCAD SCS:
- Automatically generated and discharged in accordance with GOST specification of equipment (for example in the distribution);
- Automatically generated and unloaded GOST three types of cable issues (for example in the distribution);
- Automatically generated a layout assembly constructs (eg in distribution);
- Automatically generated structural wiring cabling system of the building (eg in distribution);
- Completing the installation constructs panels in an automatic mode based on the number of ports of jobs;
- Automatically labels affixed callouts jobs;
- Automatic remarking equipment displayed in the balloon marking and reporting documents for various changes in the project;
- Project Manager, which allows fully consolidate information across the project;
- Work with database equipment manufacturers JCB;
- All database of equipment are opened for editing;
- Base DCD opened for editing and adding new signs;
- Creating a system of cable channels almost any complexity;
- Automatic selection and counting of fasteners cable channels (angles, bends, etc.), as well as attachment points for the bins;
- Calculation of the capacitance of cable channels based on the number of wiring;
- Create connections horizontal subsystem and the main subsystems of the building (for example in the distribution);
- Trace the cable as in the horizontal plane and in vertical as well as between floors , located in different DWG-files;
- Setting up of additional factors to calculate the cable for the entire project, as well as customization of cable lengths for the horizontal subsystem;
- Intelligent software objects with different tips;
- Choice of software during unloading of accounting documents - Microsoft Office or OpenOffice.org;
- Choice of units for cables and cable channels in the derivation of the specification.
Screenshots:
http://excluzive.net/uploads/posts/2...2wpedruiq.jpeg

nanoCAD Mechanics 2.0:
nanoCAD Mechanics offers great opportunities for the automation of design work in various industries. The system has all the necessary tools for the design of engineering objects. In its users - machine parts, tools and systems in compliance with GOST and standardized components, as well as the ability to perform engineering calculations to display the results on the model, draw up blueprints for ESKD and much more.
nanoCAD mechanics can be used as a complement to any system, 3D-modeling to design drawings of the projections on ESKD, and as a standalone product, completely covering the problem 2D-design and product documentation.
Extras. Information: The new version is built on an updated engine platform nanoCAD, which gives:
- Full support for the DWG format thanks to the new technology works;
- Full-fledged work to create two-dimensional drawings;
- High-speed processing of massive drawings;
- To use as part of integrated automation;
- Possibility to use the program for viewing DWG files.
Screenshots:
http://excluzive.net/uploads/posts/2...gtfgauhks.jpeg


nanoCAD VC 1.0:
Program nanoCAD VC 1.0 is designed for the design of internal systems for hot and cold running water and sanitation, as well as extinguishing the use of hydrants. The program combined design and graphic design of the section “Domestic Water Supply and Sewerage”. The software nanoCAD VC 1.0 is the first fully three-dimensional solution of the product family nanoCAD. Output documents stored in the format DWG.
The software nanoCAD VC 1.0 includes specialized features for engineer plumbing. From the established model of water supply and sanitation user gets almost all the necessary documentation:
* Floor plans;
* Axonometric scheme;
* Equipment specifications;
* Specification of water supply and sanitation;
* Statement of working drawings of the basic set;
* Statement of reference and the attached documents.
It should be noted that the axonometric scheme, specification of equipment and specification of water supply and sanitation are automatically generated. In addition to the graphical part of nanoCAD VC 1.0 enabled calculation module. The database included standard hydraulic characteristics (for SNIP 2.04.01 - 85 *) sanitary appliances, fire hydrants, water consumers. On the basis of 3D-models of the calculation is performed to the required pressure and flow rates for each system, selected pipe diameter, sizes of valves and meters.
Screenshots:

http://excluzive.net/uploads/posts/2...2gsjn7cxb.jpeg

Link Ugotfile:
Code:
http://ugotfile.com/file/1084255/nan....rar?rid=42562
http://ugotfile.com/file/1084254/nan....rar?rid=42562
http://ugotfile.com/file/1084258/nan....rar?rid=42562
http://ugotfile.com/file/1084260/nan....rar?rid=42562
http://ugotfile.com/file/1084262/nan....rar?rid=42562
http://ugotfile.com/file/1084256/nan....rar?rid=42562
http://ugotfile.com/file/1084268/nan....rar?rid=42562
http://ugotfile.com/file/1084253/nan....rar?rid=42562